Skip to main content

Tools

Полезные тулы

Intel MLC​

Intel® Memory Latency Checker (Intel® MLC) is a tool used to measure memory latencies and b/w, and how they change with increasing load on the system. It also provides several options for more fine-grained investigation where b/w and latencies from a specific set of cores to caches or memory can be measured as well.

About Intel® Memory Latency Checker:

note

Measuring Cache Performance with Intel Memory Latency Checker (MLC): medium.com @wrightchen

mlc_v3.12.tgz
Download
Ver: v3.12

AMIBCP​

AMI BIOS edit tool

AMIBCP_5.02.0034.exe
Download
Ver: 5.02.0034
AMIBCP_5.02.0031.exe
Download
Ver: 5.02.0031

AMI ROM Tool​

Aptio 5.x AFU (AFUEFI/AFULNX/AFUWIN/AFUDOS) flashing BIOS tool

  • AFUEFI download - uefi (самая беспроблемная штука для uefi-only систем)
  • AFUWIN download - windows (винда стабильно встаёт в позу при попытке заюзать бинарь)
  • AFUDOS download - dos (под uefi-only системы не подойдёт)
  • AFULNX - linux (под древние ядра, поднять около нереально, идём мимо)
AfuEfix64 help
+---------------------------------------------------------------------------+
|                 AMI Firmware Update Utility v5.15.00.0064                 |
|      Copyright (c) 1985-2021, American Megatrends International LLC.      |
|         All rights reserved. Subject to AMI licensing agreement.          |
+---------------------------------------------------------------------------+
| Usage: AfuEfix64.efi <ROM File Name> [Option 1] [Option 2]...             |
|           or                                                              |
|        AfuEfix64.efi <Input or Output File Name> <Command>                |
|           or                                                              |
|        AfuEfix64.efi <Command>                                            |
| ------------------------------------------------------------------------- |
| Commands:                                                                 |
|        /FV - Copy Secure FV to EFI.                                       |
|         /O - Save current ROM image to file                               |
|         /U - Display ROM File's ROMID                                     |
|         /S - Refer to Options: /S                                         |
|         /D - Verification test of given ROM File without flashing BIOS.   |
|        /A: - Refer to Options: /A:                                        |
|       /OAD - Refer to Options: /OAD                                       |
| /CLNEVNLOG - Refer to Options: /CLNEVNLOG                                 |
| Options:                                                                  |
|      /CMD: - Send special command to BIOS. /CMD:{xxx}                     |
|   /OEMCMD: - Send special value to BIOS. /OEMCMD:xxx                      |
|       /DPC - Don't Check Aptio 4 and Aptio 5 platform.                    |
|       /PW: - Input password for file.                                     |
|     /MEUL: - Program ME Entire Firmware Block, which supports             |
|              Production.BIN and PreProduction.BIN files.                  |
|         /Q - Silent execution                                             |
|         /X - Don't Check ROM ID                                           |
|         /S - Display current system's ROMID                               |
|       /JBC - Don't Check AC adapter and battery                           |
|  /HOLEOUT: - Save specific ROM Hole according to RomHole GUID.            |
|              NewRomHole1.BIN /HOLEOUT:GUID                                |
|        /SP - Preserve Setup setting.                                      |
|         /R - Preserve ALL SMBIOS structure during programming             |
|        /Rn - Preserve SMBIOS type N during programming(n=0-255)           |
|         /B - Program Boot Block                                           |
|         /P - Program Main BIOS                                            |
|         /N - Program NVRAM                                                |
|         /K - Program all non-critical blocks.                             |
|        /Kn - Program n'th non-critical block(n=0-15).                     |
|      /RLC: - To set default option for Rom layout change.(E:Entire BIOS   |
|              region, A:Abort, F:Force, M:Mix Non-BIOS region command.)    |
|    /CLRCFG - Program without preserving setup configuration               |
|    /BCPALL - Save all question values before flash                        |
|    /MLANG: - Multiple mapping language support.                           |
|     /HOLE: - Update specific ROM Hole according to RomHole GUID.          |
|              NewRomHole1.BIN /HOLE:GUID                                   |
|  /K:<GUID> - Program non-critical block by GUID.                          |
|         /L - Program all ROM Holes.                                       |
|        /Ln - Program n'th ROM Hole only(n=0-15).                          |
|      /ECUF - Update EC BIOS when newer version is detected.               |
|         /E - Program Embedded Controller Block                            |
|        /ME - Program ME Entire Firmware Block.                            |
|       /FDR - Flash FDR.                                                   |
|      /GBER - Flash GBER Region.                                           |
|       /DER - Flash DER.                                                   |
|       /PTT - Flash PTT.                                                   |
|       /MER - Flash MER.                                                   |
|      /MEUF - Program ME Ignition Firmware Block.                          |
|        /A: - Oem Activation file                                          |
|       /OAD - Delete Oem Activation key                                    |
| /CLNEVNLOG - Clear Event Log.                                             |
|   /CAPSULE - Override Secure Flash policy to Capsule                      |
|  /RECOVERY - Override Secure Flash policy to Recovery                     |
|        /EC - Program Embedded Controller Block. (Flash Type)              |
|    /REBOOT - Reboot after programming.                                    |
|  /SHUTDOWN - Shutdown after programming.                                  |
+---------------------------------------------------------------------------+

UEFITool​

UEFI firmware image viewer and editor. Project github

uefi-mod-tools​

ASPEED iRMP SOC Flash​